Displacement Efficiency for Low Salinity Polymer Flooding Including Wettability Alteration

Abstract

AbstractPolymer flooding can significantly improve sweep and delay breakthrough of injected water, thereby increasing oil recovery. Polymer viscosity degrades in reservoirs with high salinity brines, so it is advantageous to inject low salinity water as a preflush. Low salinity water flooding (LSW) can also improve local displacement efficiency by changing the wettability of the reservoir rock from oil wet to more water wet. The mechanism for wettability alteration for low salinity waterflooding in sandstones is not very well understood, however experiments and field studies strongly support that cation exchange (CE) reactions are the key element in wettability alteration. The complex coupled effects of CE reactions, polymer properties, and multiphase flow and transport has not been explained to date.This paper presents the first analytical solutions for the coupled synergistic behavior of low salinity waterflooding and polymer flooding considering cation exchange reactions, wettability alteration, adsorption, inaccessible pore volume (IPV), and salinity effects on polymer viscosity. A mechanistic approach that includes the cation exchange of Ca2+, Mg2+ and Na+ is used to model the wettability alteration. The aqueous phase viscosity is a function of polymer and salt concentrations. Then, the coupled multiphase flow and reactive transport model is decoupled into three simpler sub-problems, one where cation exchange reactions are solved, the second where a variable polymer concentration can be added to the reaction path and the third where fractional flows can be mapped onto the fixed cation and polymer concentration paths. The solutions are used to develop a front tracking algorithm, which can solve the slug injection problem where low salinity water is injected as a preflush followed by polymer. The results are verified with experimental data and PennSim, a general purpose compositional simulator.The analytical solutions show that decoupling allows for estimation of key modeling parameters from experimental data, without considering the chemical reactions. Recovery can be significantly enhanced by a low salinity pre-flush prior to polymer injection. For the cases studied, the improved oil recovery (IOR) for a chemically tuned LSP flood can be as much as 10% OOIP greater than with considering polymer alone. The results show the structure of the solutions, and in particular the velocity of multiple shocks that develop. These shocks can interact, changing recovery. For example, poor recoveries obtained in core floods for small low salinity slug sizes are explained with intersection of shocks without considering mixing. The solutions can also be used to benchmark numerical solutions and for experimental design. We demonstrate the potential of LSP as a cheaper and more effective way for performing polymer flooding when the reservoir wettability can be altered using chemically-tuned low salinity brine.