Abstract

The right bank high slope of the Dagangshan Hydroelectric Power Station is located in complicated geological conditions with deep fractures and unloading cracks. How to obtain the mechanical parameters and then evaluate the safety of the slope are the key problems. This paper presented a displacement back analysis for the slope using an artificial neural network model (ANN) and particle swarm optimization model (PSO). A numerical model was established to simulate the displacement increment results, acquiring training data for the artificial neural network model. The backpropagation ANN model was used to establish a mapping function between the mechanical parameters and the monitoring displacements. The PSO model was applied to initialize the weights and thresholds of the backpropagation (BP) network model and determine suitable values of the mechanical parameters. Then the elastic moduli of the rock masses were obtained according to the monitoring displacement data at different excavation stages, and the BP neural network model was proved to be valid by comparing the measured displacements, the displacements predicted by the BP neural network model, and the numerical simulation using the back-analyzed parameters. The proposed model is useful for rock mechanical parameters determination and instability investigation of rock slopes.

Highlights

  • Mechanical parameters of rock masses are crucial for stability analysis of high rock slopes [1, 2]

  • The excavation of the right bank slope of Dagangshan Hydroelectric Power Station caused lots of concrete surface cracks due to stress adjustments caused by the excavations

  • The BP neural network model was proposed to estimate the elastic moduli of the rock masses of the right bank high slope in Dagangshan Hydroelectric Power Station

Read more

Summary

Introduction

Mechanical parameters of rock masses are crucial for stability analysis of high rock slopes [1, 2]. Xia-ting et al [7] used neural network model and genetic algorithm to estimate the mechanical rock mass parameters of the permanent shiplock at the Three Gorges Project These optimization algorithms should resolve global optimal solution in a fast convergence rate and determine the unknown parameters among a large variable space. The back-propagation neural network was used to construct a function between undetermined parameters and displacements of the rock mass of the right back slope in Dagangshan Hydroelectric Power Station project. The method of combination of the BP neural network and particle swarm optimization is proved to have a powerful capability of resolving deformation parameters in rock slope problems with complex geostress and multiexcavation steps.

VIII VII VI
Back Analysis Model
Results of Monitoring Displacement
Displacement Back Analysis
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call