Abstract
This paper is intended to examine the effect of inclusion shapes, inclusion contents, inclusion elastic constants, and plate thickness on the dispersion relations and modes of wave propagation in inclusion-reinforced composite plates. The shape of inclusion is modeled as spheroid that enables the composite reinforcement geometrical configurations ranging from sphere to short and continuous fiber. Mori–Tanaka mean-field theory is used to predict the effective elastic moduli of the composite plate explicitly. The effective elastic moduli are able to elucidate the effect of inclusion’s shape, stiffness, and volume fraction on the composite’s anisotropic elastic behavior. The resulting moduli are then used to determine the dispersion relations and the modal patterns of Lamb waves using the dynamic stiffness matrix method. The types (symmetric or antisymmetric) of Lamb waves in an isotropic plate can be classified according to the wave motions are symmetrical or antisymmetric about the midplane of the plate. Classifying the wave type in an anisotropic plate is not as simple as that in an isotropic plate, and has not received proper attention in the literature. The wave types and orders are identified by analyzing the dispersion curves and inspecting the calculated modal patterns, and the results indicate that the Lamb waves in an orthotropic composite plate can also be classified as either symmetric or antisymmetric waves. It is also found that the inclusion contents, aspect ratios and plate thickness affect propagation velocities, higher-order mode cutoff frequencies, and modal patterns. Propagation speed is generally increased with the aspect ratio, e.g., using longer fibers generally results in a higher propagation speed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.