Dislocation-induced damping in metal matrix composites

Abstract

The damping response of crystalline metals and alloys is generally associated with the presence of defects in the crystal lattice. The disturbance of these defects, usually in response to an applied cyclic load, dissipates energy, a mechanism known as “internal friction”. The various defects commonly found in crystalline materials include point defects (e.g. vacancies), line defects (e.g. dislocations), surface defects (e.g. grain boundaries) and volume defects (e.g. inclusions). Among these, dislocations are noteworthy because they play a critical role, not only in the damping response of crystalline materials, but also in the overall mechanical behaviour of the materials. Among the various structural materials actively being developed, metal matrix composites (MMCs) have received considerable attention as a result of their potential to combine reinforcement properties of strength and environmental resistance, with matrix properties of ductility and toughness. Of interest is the generally observed phenomenon that MMCs exhibit unusually high concentrations of dislocations, an observation typically attributed to the difference in coefficient of thermal expansion between matrix and reinforcement. The objectives of the present paper are to provide an overview of the sources of dislocation generation in MMCs, and to provide insight into the effects that dislocations have on the damping response of MMCs. The presence of dislocations in MMCs is highlighted on the basis of transmission electron microscopy studies, and the dislocation damping mechanisms are discussed in light of the Granato-Lucke theory.