Discrete-Time Signals and Systems

Abstract

Continuous-time or analog signals are processed using analog devices such as amplifiers, filters, etc. It is impossible to process signals multiplexed from various sources using a single hardware system in the analog domain. On the other hand, digital signals can be processed using both special-purpose hardware and software systems. Worldwide use of Internet, mobile communications, etc. demands all kinds of data such as video, audio, graphics, etc. In order to receive this information on a single device, computer, for instance, it is impossible to use analog signals and techniques. In order to be able to design and implement digitally based systems, it is absolutely necessary to have an understanding of digital signals and systems. Digital signals are discrete in time and amplitude. However, we will assume discrete-time signals to have a continuum of amplitude in order to be able to analyze such signals and systems mathematically. In this chapter we will describe typical discrete-time signals mathematically and then use them to describe and analyze linear time-invariant discrete-time systems. To help the readers understand the mathematical details, we will work out examples followed by MATLAB-based examples. Since digital signals are obtained from analog sources, we will also discuss the conversion of continuous-time signals into digital signals using analog-to-digital converters (ADC).