Discrete Cohesive Zone Model to Simulate Static Fracture in 2D Triaxially Braided Carbon Fiber Composites

Abstract

A discrete cohesive zone model (DCZM) is implemented to simulate the mode I fracture of two dimensional triaxially braided carbon (2DTBC) fiber composites. The 2DTBC is modeled as an elastic-one-parameter (a66) plastic continuum. The plastic behavior of the 2DTBC was characterized by measuring a66. Mode I fracture tests are carried out by using a modified single edge notch bend (SENB) configuration. Fracture toughness (GIC) as a function of crack extension is measured by a compliance approach. The fracture tests are then simulated by using the DCZM based interface element in conjunction with the commercial software ABAQUS® through a user subroutine UEL. The simulated results, carried out under conditions of plane stress, are compared with the experimental results and also verified for mesh sensitivity. The results presented provide guidelines and a basic understanding to model structural response of non-homogeneous materials, incorporating fracture as a damage mechanism and using constituent level material properties, geometry, and fracture toughness (GIC) as input.