Abstract
Urban pluvial floods can be produced or exacerbated by an insufficient density of inlets or by their poor hydraulic efficiency. Therefore, proper consideration of the hydraulic performance of inlets is essential to guarantee the correct functioning of urban drainage systems during heavy storm events. Recent advances in computational analysis in the field of hydrodynamics modelling allow the use of the well-known concept of dual drainage for design and planning purposes by simulating flow transfers between the surface layer (streets) and underground layers (sewers) through a proper hydraulic characterisation of inlet efficiency. Powerful commercial software packages allow simulations of flow transfer and use different approaches and formulas. Many of these approaches include the possibility of treating a sewer inlet as an orifice. In this context, this paper presents a methodology to obtain orifice discharge coefficients for three inlets previously tested at the hydraulics laboratory of the Technical University of Catalonia. Discharge coefficients of 0.18–0.58 were obtained for Froude numbers of 1.12–4.40, quite far from the usual recommended values. The proposed procedure can also be applied to non-tested grates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Civil Engineers - Water Management
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
