DIRECTIONS FOR IMPROVEMENT OF STANDARDS ON LED TECHNIQUE AND LIGHTING WITH ITS USE

Abstract

One of the main tasks of high-quality lighting is to provide comfortable visual work and adequate perception of illuminated objects by obtaining light with a wide range of correlated color temperatures with high color rendering quality. The paper analyzes the shortcomings of national regulatory documents on establishing tolerances for the color of lamps and fixtures using LEDs and evaluating their quality in color reproduction. Instead of using Mac Adam ellipses on the SIE 1931 (x, y) color chart for establishing the color requirements it is recommended to use circles on the 1976 SIE (u ', v'), and evaluate the color rendering quality using the CRI method, additionally apply the CQS and TM 30-18 methods. Due to the fact that the spatial color of LED luminaires can be inhomogeneous, it is recommended to indicate both the average color and color in a certain direction, as well as an indicator of the color heterogeneity. The necessity of developing standards for protection against unwanted non-visual biological effects, as well as other negative effects of artificial light, in particular, excessive brightness, pulsation of the light flux, photobiological hazards, etc., is substantiated. Considering the importance of the influence of light pulsation on the quality of lighting, before the development of CIE or IEC standards, it is recommended that national standards for LED lamps and luminaires include the requirements for description of pulsation parameters and measurement methods in accordance with the recommendations of IEEE 1789-2015 standard, which is the most advanced today. For the design of ergonomic lighting, it is proposed to provide information on lamps and luminaires related to their maximum brightness. When developing new criteria for lighting, taking into account the visual impact, it is already possible to use the knowledge accumulated by this time, in particular, for creation of biologically active and biologically dimmed light by changing the spectral composition of radiation and illumination. Proposals related to the limits of the correlated colour temperature, brightness, level of pulsation for lighting of children and educational institutions, residential premises and the like are also considered. Recommendations on the development of new national standards of Ukraine harmonized with international ones are also provided. Keywords: сolor rendering index, percent flicker, correlated colour temperature, illumination, photobiological safety