Abstract
Nowadays, the problem of oil spill and organic solvent pollution has become more and more serious, and developing a green and efficient treatment method has become a research hotspot. Herein, the preparation of porous super‐hydrophobic aerogel by directional freezing with cellulose nanofibre (CNF) as the base material, polyvinyl alcohol (PVA) as the cross‐linking agent and montmorillonite (MMT) as the modifier and filler, followed by hydrophobic treatment with chemical vapour deposition is reported. The prepared composite aerogel presented three‐dimensional inter‐perforation network structure, low density (26.52 mg⋅cm−3), high porosity (96.1 %) and good hydrophobicity (water contact angle of 140°). Notably, the composite aerogel has a good adsorption effect on different oils and organic solutions, and its adsorption capacity can reach 40–68 times of its initial weight. After complete adsorption, the aerogel could be easily collected. More importantly, the composite aerogel had high strength, whose compressive stress at 70 % strain reached 0.15 MPa and could bear over 1290 times its weight without deformation after 2 weeks. A new, green, simple and efficient absorbent for the adsorption of oils and organic solvents is provided.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.