Abstract
Directional measurements of over 2600 links in four distinct factories at 28 GHz are used to formulate the path gain and azimuth gain models to allow reliable 90% coverage estimates. A simple theoretical model of path gain, dependent on ceiling and clutter heights, is found to represent path gain across the four factories with 4.4 dB root-mean-square error (RMSE), contrasted with 6.9 dB slope-intercept fit and 8.5–14.9 dB RMSE for 3GPP factory models. The model also did well against 3.5 GHz path loss data collected over 18 MHz bandwidth in one of the factories, with an RMSE of 3.3 dB. In nonline-of-sight (NLOS) conditions, scattering reduces available antenna azimuth gain from nominal value by up to 7.3 dB in 90% of links. Line-of-sight (LOS) blockage by a 1.7 m × 1 m obstacle in factory aisle leads to 7 dB signal reduction, attributed to availability of other paths. It is found that an access point (AP) using 25 dBm transmit power per polarization, with 23 dBi nominal gain and omnidirectional terminals, supporting <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2\times $ </tex-math></inline-formula> 2 MIMO in a 400 MHz bandwidth, can provide 130 Mb/s for 90% of factory locations within 50 m.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.