Abstract
PurposeTo analyse the feasibility of directional ablation using a multi-tine electrode. MethodsA multi-tine electrode capable of operating in multipolar mode has been used to study the directional ablation. In addition to the basic design, similar to commercially available FDA approved multi-tine electrode, tines have been insulated from each other inside the probe base and tip using a thin insulating material of thickness 0.25 mm. A cylindrical single-compartment model of size 6 cm × 6 cm has been used to model normal liver tissue. The temperature-controlled radiofrequency ablation has been employed to maintain the tine-tips at different temperatures. Electro-thermal simulations have been performed by using a commercial multi-physics software package based on finite element methods. To make this study feasible a new approach to predict the ablations have been proposed and used in this study. ResultsAsymmetric ablation zone with up to 5 mm difference in ablation boundary between the intended and non-intended direction has been observed along the transverse direction. Reduction in ablation up to 5 mm along the axial direction in comparison to the monopolar mode has also been observed. ConclusionMulti-tine electrode modified to operate in multipolar mode can create directional ablations of different shapes and can be used to target position and shape specific tumours.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
