Direct yaw moment control of an ultra-lightweight solar-electric passenger vehicle with variation in loading conditions

Abstract

Large variations load-to-curb weight ratios are linked to significant changes in parameters critical to control design for vehicle stability control system. Unique and highly customised vehicles, such as the lightweight solar car in this paper, are more susceptible to the impact of such variations when developing control methods. The purpose of this study is to study the influence of variation in loading conditions, the effect of ignoring changes in inertial parameters, and develop and compare a number of alternative vehicle stability control methods that can be applied to rear-wheel driven vehicles via in-wheel motors. In this paper a Sliding Mode Control (SMC) both nominal and when including uncertainty, Dynamic Curvature Control (DCC) and a Proportional–Integral Control (PI) strategies are compared to the baseline open-loop control case. Each controller is implemented through co-simulation via MATLAB® Simulink® and Siemens Amesim™ using a 15-DOF non-linear vehicle model. The results show that SMC achieves the best performance, whilst DCC tends to overshoot target conditions prior to settling, indicating that SMC is the preferred control strategy. It is also demonstrated that by ignoring the change in the inertial parameters in simulation environments can produce an incorrect translation of the control performance.