Abstract

Integrated planar solid oxide fuel cell (IP-SOFC) with multilayered structure has been fabricated via direct-writing process named robo-dispensing. Partially stabilized zirconia (PSZ) substrate with sufficient mechanical strength and gas permeability was utilized as a support for SOFC. The 2-cells serially integrated planar SOFC in which each cell is composed of the line-shaped electrode and electrolyte was produced The SOFC component paste materials were dispensed through cylindrical nozzle of 0.21 mm in diameter onto a moving plate that was controlled by robo-dispensing machine. The thicknesses of anode, electrolyte and cathode were 30 μm, 15 μm and 20 μm, respectively. The fabricated IP-SOFC exhibited OCV of 1.82 V and maximum power density of 35 mW.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.