Abstract
AbstractA zero‐gap flow electrolyzer with a tin‐coated gas diffusion electrode as the cathode was used to convert humidified gaseous CO2 to formate. The influence of humidification, flow pattern and the type of membrane on the faradaic efficiency (FE), product concentration, and salt precipitation were investigated. We demonstrated that water management in the gas diffusion electrode was crucial to avoid flooding and (bi)carbonate precipitation, to uphold a high FE and formate concentration. Direct water injection was validated as a novel approach for water management. At 100 mA/cm2, direct water injection in combination with an interdigitated flow channel resulted in a FE of 80 % and a formate concentration of 65.4+/−0.3 g/l without salt precipitation for a prolonged CO2 electrolysis of 1 h. The use of bipolar membranes in the zero‐gap configuration mainly produced hydrogen. These results are important for the design of commercial scale CO2 electrolyzers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
