Abstract
In this work, Cu2O/GO doped Na nanocomposites were prepared via sol-gel auto-combustion procedure. The material structure was analysed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and environmental scanning electron microscopy (ESEM). The crystal structure of the Cu2O/GO, Cu1.7Na0.3O/GO and Cu1.4Na0.6O/GO nanocomposites was found to be cubic as evidenced by XRD patterns. The complexing of copper oxide and GO was confirmed by FTIR and Raman spectroscopy. ESEM micrographs showed that Cu2O nanoparticles are integrated into GO nanosheets. The surface area of these nanocomposites decreased from 122 to 59 m2/g. The optical energy gap was found to decrease from 2.14 to 1.72 eV with increasing sodium content. The addition of sodium to Cu2O/GO nanocomposites accelerated the hydrogen evolution from NaBH4. The maximum rate of hydrogen (10,981 mL/g·min) was achieved for the Cu1.4Na0.6O/GO nanocomposite sample. These findings confirm that the prepared nanocomposites could be used as efficient hydrogen catalysts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.