Direct simulation of spray cooling: Effect of vapor bubble growth and liquid droplet impact on heat transfer

Abstract

Numerical modeling of multiphase flow using level set method is discussed. The 2-D model considers the effect of surface tension between liquid and vapor, gravity, phase change and viscosity. The level set method is used to capture the movement of the free surface. The detail of incorporating the mechanism of phase change in the incompressible Navier–Stokes equations using the level set method is described. The governing equations are solved using the finite difference method. The computer model is used to study the spray cooling phenomenon in the micro environment of about 40 μm thick liquid layer with vapor bubble growing due to nucleation. The importance of studying the heat transfer mechanism in thin liquid film for spray cooling is identified. The flow and heat transfer details are presented for two cases: (1) when the vapor bubble grows due to nucleation and (2) merges with the vapor layer above the liquid layer and when a liquid droplet impacts the thin liquid layer with vapor bubble growing.