Abstract
In this paper, we present an optical maskless exposure approach for direct patterning of large-area high resolution microfluidic chips using photosensitive poly(dimethylsiloxane) (PDMS) materials. Both positive- and negative-tone photosensitive PDMS (photoPDMS) were successfully patterned into various microfluidic devices with complex geometries by using an optical maskless lithography process. The positive-tone PDMS is used for patterning of largearea chips, while the negative-tone PDMS is demonstrated to fabricate high-resolution microstructures and on-chip devices. With the seamless pattern-stitching technique, a large-area microfluidic chip with size of 5.5 × 2.8 cm2 with complex three-dimensional (3D) staggered herringbone mixers (SHMs) for micro-flow gradient generation has been directly fabricated within 125 minutes by using the positive-tone PDMS. A small microfluidic chip with feature size as small as 5 μm is demonstrated by using the negative-tone PDMS. The experimental results reveal that the optical maskless lithography technology enables to rapidly pattern high-resolution microstructures and is very promising for development of lab-on-a-chip devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.