Direct numerical simulations of collision efficiency of cohesive sediments

Abstract

A clear understanding of the collision efficiency of cohesive sediment particles is critical for more accurate simulation of the flocculation processes. It is difficult, if not impossible, to carry out laboratory experiments to determine the collision efficiency for small particles. Direct Numerical Simulation (DNS) is a relatively feasible approach to describe the motion of spherical particles under gravity in calm water, and thus, to study the collision efficiency of these particles. In this study, the Lattice Boltzmann (LB) method is used to calculate the relative trajectories of two approaching particles with different ratios of sizes and densities. Results show that the inter-molecular forces (i.e., van der Waals attractive force, electrostatic repulsive/attractive force, and displacement force), which are usually neglected in previous studies, would affect the trajectories, and thus, lead to an overestimation of the collision efficiency. It is found that to increase the particle size ratio from 0.1 to 0.8 only slightly increases the collision efficiency, since the force caused by fluid-solid interaction between these two particles is reduced. To increase the submerged particle density ratio from 1 to 22, however, would significantly decrease the collision efficiency. Earlier analytical formulations of collision efficiency, which only consider the effects of particle size ratio, have significantly overestimated the collision efficiency (change from 0.01 to 0.6) when the particle size ratio is around 0.5.