Direct numerical simulation of flow over a cylinder immersed in the grid-generated turbulence

Abstract

In this study, we conducted three-dimensional direct numerical simulations to investigate the impact of incoming turbulence on the flow dynamics behind a single main cylinder at Reynolds number of Re = 3900. The incoming turbulence is generated by ten side-by-side cylindrical grid bars, whose center-to-center distance T is set equal to 2D, where D is the diameter of both the grid bars and the main cylinder. It is found that in the wake of the grid bars, the non-Gaussian production region and the homogeneous decay region, which are, respectively, located at X/D<4 and X/D>4, were separated by the development of turbulence intensity Ti. Compared to the uniform incoming flow, the hydrodynamic forces induced by the present incoming turbulence are markedly distinct in magnitude. Specifically, the time-averaged drag coefficient C¯d is increased by 29.4%, and more surprisingly, the root mean square value of the lift coefficient is increased by as much as 500%. Statistical analysis is then performed, in terms of the Reynolds stresses, mean field, and the turbulent wake visualization to show variations in the flow dynamics. Results indicate that the incoming turbulence could accelerate the turbulent transition of shear layers and lead to a contraction of the vortex formation region. In addition, the long streamwise streaky vortical structures leading to an increase in Reynolds stress are found in front of the cylinder surface, which illustrates that the effect of incoming turbulence has penetrated inside the front boundary layer.