Abstract
Various sulfonated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO)-polybenzimidazole (PBI) blend membranes were prepared and investigated as proton exchange membranes (PEMs) for direct methanol fuel cell (DMFC) applications. With increasing PBI content water swelling, ion exchange capacity, proton conductivity and methanol permeability of SPPO-PBI membranes were found to be decreased due to acid-base interactions between sulfonate and the amine groups of the blended components. Among various SPPO-PBI blend membranes, 80:20 wt% was found as the optimum composition, which showed the highest membrane selectivity parameter. Direct methanol-air single fuel cell tests revealed a higher cell efficiency of 11.6% for SPPO80-PBI20 than 10.9% for Nafion ®117 at 5 M methanol feed, and also a higher power density of 57.6 mW.cm −2 compared to 39.4 mW.cm −2 for Nafion ®117. Transport properties as well as DMFC performance results of SPPO-PBI blend PEMs converge to indicate their potential for DMFC applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
