Direct Integration of Numerous Dams and Reservoirs Outflow in Continental Scale Hydrologic Modeling

Abstract

AbstractDespite the recent developments in continental‐scale streamflow and flood inundation modeling frameworks, effects of time‐specific and spatially explicit storage‐release dynamics of numerous dams and reservoirs remain underexplored. This paper fills this knowledge gap by directly inserting operational daily flow release data at 175 dam locations into a streamflow simulation of ∼1.2 million river reaches in the Mississippi River Basin (MRB), and therefore quantifying the effect of these regulations on streamflow and flood inundation extents. Using a streamflow routing model called the Routing Application for Parallel computatIon of Discharge (RAPID) and flood inundation mapping model called AutoRoute, two simulation scenarios were constructed respectively including and excluding the daily flow releases from those dams and reservoirs for a 10‐year period (2005–2014). Flood inundation maps were simulated for peak flow conditions at a ∼10‐m hyper spatial resolution. Kling‐Gupta efficiency (KGE) values show that streamflow model performance considerably improved when reservoirs were included in the modeled system, varying from 2% in the eastern region to 380% in the drier western region. Despite small variation of streamflow model improvement with reservoir release inclusion in the eastern region of the basin, the flow model was able to better capture observed peak flows. For a 1% change in streamflow, we observe a 0.8% change in estimated flood inundation. Comparisons to three observed flood events in the MRB demonstrate that the flood inundation estimates improve when percent change in streamflow is relatively high. Overall, inclusion of reservoir release resulted in substantial improvement in continental‐scale streamflow and flood inundation mapping.