Abstract
Based on the selective volatilization taking place between the matrix and the analyte in the graphite furnace, a new method for a direct ICP-AES determination of trace impurities in SiO2 powder using electrothermal vaporization (ETV) as a slurry-sampling technique is described. A polytetrafluoroethylene (PTFE) emulsion is used as a fluorinating reagent to promote the vaporization of impurity elements from SiO2 powder. The fluorinating vaporization and transportation behaviors, the matrix effects and the particle-size effects have been investigated systematically. When the sampling volumes are 10μl, the detection limits of Cu, Cr, Fe and Ti are 1.05, 1.58, 1.06 and 0.9μg l-1, respectively, and the RSDs are in the range of 1.9-4.1%. The proposed method has been applied to analyze SiO2 powder without any chemical pretreatment. The determined values are in good agreement with the results obtained by using acid decomposition-pneumatic nebulization ICP-AES.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
