Abstract

ABSTRACT The effect of operating conditions on the liquefaction behaviour of a Spanish lignite was studied using a 250 ml stirred autoclave, and the following operating conditions (except otherwise specified): 400 °C, 1 hour, 3.5 MPa initial (cold) H2 pressure, 400 rpm and 40 g/10 g tetralin/coal charge. The liquefaction products were fractionated into oils, asphaltenes, preasphaltenes and solid residue using pentane, toluene and THF as extractive solvents The influence of temperature was explored in the 300–475 °C range, observing little further improvement in liquefaction yields over 400 °C, and retrogressive reactions over 450 °C. The effect of time was studied from 0 to 180 minutes and was concluded that 1 hour is an appropriate period for liquefying a black lignite, since there is little further conversion for longer times. The influence of pressure and gas type was studied using 0, 3.5 and 7.0 MPa initial (cold) pressure of H2 and of N2, and the effect of stirring using 0 and 400 rpm. Little influen...

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call