Abstract
Direct electron transfer of hemoglobin, immobilized on a nickel oxide nanoparticles modified graphite electrode, was studied. Nickel oxide nanoparticles synthesized by electrochemical methods. The prepared nanoparticles were characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM). The resulting electrode displayed an excellent redox behavior for the hemoglobin. The hemoglobin showed a quasi-reversible electrochemical redox behavior with a formal potential of -48±5 mV (versus Ag/AgCl) in 50 mM potassium phosphate buffer solution at pH 7.0 and temperature 25°C. The cathodic transfer coefficient was 0.45 and electron transfer rate constant was evaluated to be 1.95 s−1. Furthermore, the modified electrode was used as a biosensor and exhibited a satisfactory stability and sensitivity to H2O2. The linear range of this biosensor for H2O2 determination was from 15 to 650 µM while standard deviation in 40 µM H2O2 concentration was 2.8% for 4 repetitions. Key words: Electron transfer, hemoglobin, nickel oxide, nanoparticles, biosensor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.