Direct detection transmission of a PAM signal with power fading mitigation based on Alamouti coding and dual-drive MZM.

Abstract

Power-fading impairment induced by fiber dispersion and photodiode detection imposes a fundamental limitation on the intensity-modulation direct-detection (IM-DD) transmission systems. In this work, we propose a cost-effective pulse-amplitude modulation (PAM) signal transmission scheme with power-fading mitigation enabled by Alamouti coding and dual-drive Mach-Zehnder modulator (DDMZM). By interleaving the symbol blocks in the time domain for upper- and lower-arm of the DDMZM, flat end-to-end frequency response can be obtained without spectral nulls after combining the photocurrents at odd and even time slots. For single channel demonstration, we experimentally transmit up to 160Gb/s PAM-4, 140Gb/s PAM-6, and 108Gb/s PAM-8 signals over 80 km standard single-mode fiber (SSMF) with bit-error rates (BERs) below the 20% soft-decision forward error correction (SD-FEC) threshold of 2.0×10-2. For wavelength division multiplexing (WDM) transmission, 8λ×150Gb/s PAM-4 signals spacing at 100 GHz can also achieve 80 km reach. Moreover, we compare the optical signal-to-noise ratio (OSNR) sensitivity with single sideband (SSB) scheme and evaluate the tolerance of bias deviation in numerical simulation. The proposed Alamouti coding-based scheme provides a hardware-efficient and dispersion-tolerant candidate for high-speed inter-data center interconnect (DCI) applications.