Direct conversion of natural gas into COx-free hydrogen and MWCNTs over commercial Ni–Mo/Al2O3 catalyst: Effect of reaction parameters

Abstract

A commercial hydrotreating nickel molybdate/alumina catalyst was used for the direct conversion of natural gas (NG) into COx-free hydrogen and a co-valuable product of multi-walled carbon nanotubes (MWCNTs). The catalytic runs were carried out atmospherically in a fixed-bed flow reactor. The effect of reaction temperature between 600 and 800°C, and dilution of the NG feed with nitrogen as well as pretreatment of the catalyst with hydrogen were investigated. At a reaction temperature of 700°C and dilution ratio of NG/N2=20/30, the optimum yield of H2 (∼80%) was obtained with higher longevity. However, using the feed ratio of NG/N2=30/20, the optimum yield of MWCNTs was obtained (669%). X-ray diffraction pattern for the catalyst after the reaction showed that the MWCNTs were grown on the catalyst at all reaction temperatures under study. TEM pictures revealed that the as-grown MWCNTs at 600, 650 and 800°C are short and long with a low graphitization degree. At 700°C a forest of condensed CNTs is formed, whereas both carbon nanofibers and CNTs were formed at 750°C.