Abstract
Acrylic acid can be successfully produced in a single reactor via subsequent oxidation of the glycerol-dehydrated products. Selective dehydration of glycerol to acrolein was studied at 275–400 °C over HZSM-5, HBeta, HMordenite and HY. The V–Mo oxides (15–70 mol%V) on silicic acid support (20–100 wt% mixed oxides loading) were then included as a second bed for subsequent oxidation of the dehydrated products. Over the acid zeolites, acrolein and acetol are mainly generated, together with acetaldehyde, propionaldehyde, pyruvaldehyde and other oxygenates as secondary products. A complete conversion of glycerol with high selectivity to acrolein (up to 81 mol%) can be obtained when medium pore zeolites (HZSM-5) and low glycerol concentration (10–30 wt%) was used at 300 °C. A separated-sequential bed system provides high selectivity for acrylic acid with small amount of acetic acid and acetaldehyde (∼15 mol%). The catalyst with high V content promotes total oxidation of the dehydrated products to CO while that with highly dispersed V–Mo–O phases affords 98% selectivity to acrylic acid with 48% acrolein conversion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
