Abstract
One of the directions of the heavy duty machine is the operator cabin construction, which provides a high level of comfort. Adequate control of active suspension drives can reduce low frequency and large amplitude vibrations occurring in a number of cabin degrees of freedom. The main link of the mechanism is the platform with cab suspended on two rockers and one actuator. Article proposes methods for determining the length of suspension arms, the width of the platform and centres of the joints, which are connected to the suspension. It has been proved for the flat case that if the momentary centre of rotation of the platform relative to the machine frame is located inside the road roughness zone is a single drive can effectively reduce transverse vibration and angle vibration around the longitudinal machine axis. Further conditions that determine links size are to prevent from peculiar positions, to avoid collision between cab wall and suspension joints. Presented relations between the height of the waist rough roads, wheelbase machine, cab mounting height on the machine and the dimensions of the link suspension mechanism. Presented dimensional calculation results cab suspension links dedicated to Caterpillar 924 GZ loader. Assuming the vertical driving cab calculated inaccuracy of its transverse displacements. Presented the results showing influence of the cab assembly height on the cabin mounting links dimensions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
