Digital simulation of distortion-induced fatigue in steel bridges with different geometrical configurations

Abstract

Distortion-induced fatigue cracks at web gaps often occur in multi-girder steel bridges under vehicle loads. This paper presents full size digital simulations of steel girder bridges with different geometrical configurations, to explore the distortion-induced fatigue cracking performance. In the digital simulations, four geometrics are considered, in addition to two web gap details, namely the vertical stiffener web gap and the horizontal gusset plate web gap. Introducing multi-layer and multi-pass welds residual welding stress fields, digital fatigue simulation results show that the distortion-induced fatigue cracks at both web gaps are Mode I-II-III combined cracks dominated by Mode I. The coupling of the three modes is more prominent at the vertical stiffener web gap compared to the horizontal gusset plate web gap. In the skewed bridge, curved bridge, and skewed-curved bridge, the significant bending-torsional coupling effect, the structural asymmetry, and the stress deformation asymmetry cause an increment in distortion ranges, fatigue crack growth rates, and the proportions of Mode II and III cracks. The fatigue strength categories for vertical stiffener web gap and horizontal gusset plate web gap in straight, skewed, curved and skewed-curved bridges are category 125, 112, 110 and 110, and category 160, 140, 100 and 100 of the Chinese specification and Eurocode, respectively. Therefore, the geometrical configuration is an important factor affecting the distortion-induced fatigue behavior, which should be considered in the fatigue design and maintenance of steel girder bridges.