Digital rock physics and laboratory considerations on a high-porosity volcanic rock

Abstract

<p>Microtomographic imaging techniques and advanced numerical simulations are combined by digital rock physics (DRP) to obtain effective physical material properties. The numerical results are typically used to complement laboratory investigations with the aim to gain a deeper understanding of physical processes related to transport (e.g. permeability and thermal conductivity) and effective elastic properties (e.g. bulk and shear modulus). The present study focuses on DRP and laboratory techniques applied to a rock called reticulite, which is considered as an end-member material with respect to porosity, stiffness and brittleness of the skeleton. Classical laboratory investigations on effective properties, such as ultrasonic transmission measurements and uniaxial deformation experiments, are very difficult to perform on this class of high-porosity and brittle materials.</p><p>Reticulite is a pyroclastic rock formed during intense Hawaiian fountaining events. The open honeycombed network has a porosity of more than 80 % and consists of bubbles that are supported by glassy threads. The natural mineral has a strong analogy to fabricated open-cell foams. By comparing experimental with numerical results and theoretical estimates we demonstrate the potential of digital material methodology with respect to the investigation of porosity, effective elastic properties, thermal conductivity and permeability</p><p>We show that the digital rock physics workflow, previously applied to conventional rock types, yields reasonable results for a high-porosity rock and can be adopted for fabricated foam-like materials. Numerically determined effective properties of reticulite are in good agreement with the experimentally determined results. Depending on the fields of application, numerical methods as well as theoretical estimates can become reasonable alternatives to laboratory methods for high porous foam-like materials.</p>