(Digital Presentation) Unraveling of the Morphology and Chemistry Dynamics in the FEC-Generated Silicon Anode SEI across Delithiated and Lithiated States

Abstract

The silicon solid electrolyte interphase (SEI) faces cyclical cracking and reconstruction due to the ~350% volume expansion of Si which leads to shortened cell life during electrochemical cycling. Understanding the SEI morphology/chemistry and more importantly its dynamic evolution from delithiated and lithiated states is paramount to engineering a stable Si anode. Fluoroethylene carbonate (FEC) is a preferred additive with widely demonstrated enhancement of the Si cycling. Thus, insights into the effects of FEC on the dynamics of the resulting SEI may provide hints toward engineering the Si interface. Herein, ATR-FTIR, AFM, tip IR, and XPS probing all show pronounced relative invariance of the FEC-generated SEI compared to the FEC-free SEI between adjacent lithiated and delithiated states beyond the formation cycles. The SEI of Si thin film model surfaces in the baseline 1 M LiPF6 in EC:EMC (1:1) undergoes major morphological and chemical speciation swings between half-cycles while comparatively the SEI upon addition of FEC displays far less dynamic evolution. This morphology and chemistry stability of the FEC-SEI supports the enhanced cycling stability of silicon anodes in FEC-containing electrolytes. The experimental evidence gathered suggests that the FEC-SEI invariance is enabled by an elastomeric polycarbonate matrix that preserves the SEI integrity against the expansion of silicon upon lithiation. In turn, less electrolyte-consuming reconstruction occurs which manifests as and high LiF content from one half-cycle to the next. This work provides critical insights to enhance the silicon anode stability via targeted SEI engineering, namely that LiF protected by an elastomeric protective matrix may be key to buffering the unavoidable mechanical disruption. Figure 1