Abstract
A dental defect is one of the most common oral diseases, and it often requires a full crown restoration. In this clinical operation, the dentist must manually prepare the affected tooth for the full crown so that it has a convergence angle between 4° and 10°, no undercuts, and uniform and even shoulder widths and depths using a high speed diamond bur in the patient׳s mouth within one hour, which is a difficult task that requires visual–manual operation. The quality of the tooth preparation has an important effect on the success rate of the subsequent prosthodontic treatment. This study involved research into digital modeling technology for full dental crown tooth preparation. First, the margin line of the tooth preparation was designed using a semi-automatic interactive process. Second, the inserting direction was automatically computed. Then, the characteristic parameters and the constraints on the tooth preparation were defined for the model. Next, the shoulder and axial surface of the tooth preparation were formed using parametric modeling. Finally, the implicit surface of a radial basis function was used to construct the tooth preparation׳s occlusal surface. The experimental results verified that the method of digital modeling for full crown preparation proposed in this study can quickly and accurately implement personalized designs of various parameters, such as the shoulder width and the convergence angle; it provides a digital design tool for full crown preparation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.