Abstract

Solar photovoltaic thermal (PVT) is an emerging technology capable of producing electrical and thermal energy using a single collector. However, to achieve larger market penetration of this technology, it is imperative to have an understanding of the energetic performance for different climatic conditions and the economic performance under various financial scenarios. This paper thus presents a techno-economic evaluation of a typical water-based PVT system for a single-family house to generate electricity and domestic hot water applications in 85 locations worldwide. The simulations are performed using a validated tool with one-hour time step for output. The thermal performance of the collector is evaluated using energy utilization ratio and exergy efficiency as key performance indicators, which are further visualized by the digital mapping approach. The economic performance is assessed using net present value and payback period under two financial scenarios: (1) total system cost as a capital investment in the first year; (2) only 25% of total system cost is a capital investment and the remaining 75% investment is considered for a financing period with a certain interest rate. The results show that such a PVT system has better energy and exergy performance for the locations with a low annual ambient temperature and vice versa. Furthermore, it is seen that the system boundaries, such as load profile, hot water storage volume, etc., can have a significant effect on the annual energy production of the system. Economic analysis indicates that the average net present values per unit collector area are 1800 and 2200 EUR, respectively, among the 85 cities for financial model 1 and financial model 2. Nevertheless, from the payback period point of view, financial model 1 is recommended for locations with high interest rate. The study is helpful to set an understanding of general factors influencing the techno-economic performance dynamics of PVT systems for various locations.

Highlights

  • IntroductionThe concept of “electrify everything” considers solar energy as a key renewable technology with an aim of de-carbonization of domestic heating demand [1]

  • This study aims at simulation and mapping of the energetic and economic indicators of a typical PVT system over different regions to establish a digital performance database for various key performance indicators (KPIs)

  • The results show that the major parameter influencing the PVT performance is global horizontal irradiation (GHI), and results derived a strong linear correlation between collector output and GHI

Read more

Summary

Introduction

The concept of “electrify everything” considers solar energy as a key renewable technology with an aim of de-carbonization of domestic heating demand [1]. Installation capacity from the last few years has further strengthened the importance of PV as the main driver of renewable transformation [2]. The concurrence of heat/electricity demand and limited roof area in domestic dwellings does require technologies which can generate energy efficiently in both thermal and electrical form. There is a huge potential for well-designed systems by combining both solar PV and solar thermal technologies. A relatively new commercialized concept of solar photovoltaic/thermal (PVT) technology can achieve such a goal by generating both electrical and thermal energy together using a single panel [4].

Objectives
Methods
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call