Abstract
The diffusion behaviour of the grain-growth inhibitors (GGI) Cr and V during early sintering stages from 950 to 1150°C was investigated by means of diffusion couples of the type WC-GGI-binder/WC-binder. Besides Co, also alternative Fe/Ni and Fe/Co/Ni binder alloys were investigated. It was found that the diffusion in green bodies differs significantly from sintered hardmetals. Diffusivities in the binder phase were determined from diffusion couples prepared from model alloys and were found to be almost equal for Co and alternative binder alloys. The diffusion parameters determined from green bodies allowed to estimate the GGI distribution in a hardmetal during heat up. This was subsequently used to estimate an appropriate grain size of VC and Cr3C2 in hardmetals, which is required to ensure a sufficient GGI distribution during sintering before WC grain-growth initiates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
