Abstract
A diffractive optical element (DOE) has been designed, fabricated and used in an external feedback configuration to set the wavelength of operation of uncoated Fabry-Pérot diode lasers. The DOE was designed to replace the conventional elements of an external feedback system, which are a collimating lens and grating in the Littrow configuration. The goal was to simplify use of the external cavity laser by replacing the lens and grating with a single optical element while maintaining the performance that is achieved with a grating and lens. Four DOEs were fabricated with two different focal lengths and two different reflectivities. DOE external cavity lasers were tested for maximum tunable range and stability of the wavelength of operation and compared with an external cavity laser based on a lens and grating in the Littrow configuration. A 40 nm tuning range was achieved with the DOE external cavity laser and this is comparable with the tuning range of the external cavity lasers based on a grating and collimating lens in the Littrow configuration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
