Abstract

The lower Permian tight gas sandstones (TGSs) in the northeastern Ordos Basin have developed a complex pore network composed mainly of secondary pores with strong reservoir heterogeneity, which affects evaluation and exploitation of gas resources. In this study, lower Permian TGSs were analyzed through the thin sections, scanning electron microscopy, X-ray diffraction, He porosimetry, high-pressure mercury injection capillary pressure, X-ray computed tomography, and nuclear magnetic resonance experiments to elucidate the differential developmental characteristics of secondary pores and their effects on the pore structures and movable fluid distribution. Secondary pores in the lower Permian TGSs include dissolution pores associated with feldspar dissolution and micropores related to authigenic clay minerals. Based on fractal results, we designated the first-order dissolution pores as those with pore throat diameters greater than 1.98 μm, the second-order dissolution pores as those with pore throat diameters between 0.05 and 1.98 μm, and the pore throats diameters of micropores are mainly smaller than 0.05 μm. Both volumetric feldspar leaching calculations and petrographic statistics suggest that the secondary porosity observed in the lower Permian TGSs may not represent a net increase in porosity and more likely represents a redistribution of the original porosity. Dissolution requires sandstones with nonnegligible initial porosity and permeability: coarse-grained, quartz-rich, low proportion of ductile grains sandstones are more likely to maintain high porosity during burial, and dissolution of coarse-grained feldspar facilitates the development of first-order dissolution pores, thus generating the highest redistributed secondary porosity. The first-order dissolution pores have wide pore throat diameters, which enable seepage of movable fluids; the second-order dissolution pores have intermediate pore throat diameters, which allow moderate movable fluid seepage; and the micropores have small pore throat diameters, which are not conducive to seepage of movable fluids. Combinations of different types of secondary pores lead to differences in pore structures and distributions of movable fluids in the lower Permian TGSs. Specifically, TGSs with high first-order dissolution porosity have better pore structures, corresponding to the highest movable fluid saturation (MFS) and movable fluid porosity (MFP). When micropores dominate the pore system, the pore structure and pore network connectivity are poor, and the MFS and MFP decrease.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call