Abstract
Pb 0.5,Sr 0.5TiO 3 (PST) thin films were deposited on the LaNiO 3 (LNO(1 0 0))/Si and Pt/Ti/SiO 2/Si substrates by the alkoxide-based sol–gel method. Structural and dielectric properties of PST thin films for the tunable microwave device applications were investigated. The PST films, which were directly grown on the Pt/Ti/SiO 2/Si substrates, showed the random orientation. For the LNO/Si substrates, the PST thin films exhibited highly (1 0 0) orientation. Compared with randomly oriented films, the highly (1 0 0)-oriented PST thin films showed better dielectric constant, tunability and figure of merit (FOM). The dielectric constant, tunability and FOM of the highly (1 0 0)-oriented PST thin film increased with increasing annealing temperature due to the decrease in lattice distortion. The differences in dielectric properties may be attributed to the change in the film stress and the in-plane oriented polar axis depending on the substrate that was used. The dielectric constants, dielectric loss and tunability of the PST thin films deposited on the LNO/Si substrates measured at 1 MHz were 483, 0.002 and 60.1%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.