Abstract
0.15BiScO3-0.85(Pb1-3x/2Bix)(Ti0.98Mn0.02)O3 (x=0.04~0.10), were prepared by using conventional solid phase processing. The results of X-ray diffraction (XRD) show that the ceramics have a single phase tetragonal perovskite structure. The ceramics, poled by normal poling process, have piezoelectric coefficient d33, planar electromechanical coupling factor kp and thickness electromechanical coupling factor kt of 50~60pC/N, ~11% and ~30%, respectively. A greatly high mechanical quality factor Qm of 1540 was obtained at x=0.08. The Curie temperature (Tc) is in the range of 520Ç⨍Ï550 ‥_C, higher than 490 ‥_C of pure PbTiO3. The combination of good piezoelectric properties and high Tc make these ceramics suitable for elevated temperatures piezoelectric devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.