Abstract

PurposeThe paper presents the results of research carried out on esters of carbonic, adipic, and sebacic acids with respect to their use as components of fully synthetic lubricating oil produced from a polyalphaolefin base. Straight dicarboxylic acid esters were synthesized in a transesterification reaction of dimethyl carbonate, dimethyl adipate, and dimethyl sebacate with 2‐ethylhexanol and 3,5,5‐trimethylhexanol.Design/methodology/approachOligomeric esters of adipic acid and sebacic acid were synthesized using neopentyl glycol, appropriate dimethyl adipate or dimethyl sebacate and 2‐ethylhexanol as the starting material. The basic physicochemical properties of esters were determined and their compatibility with synthetic oils were defined. They were also evaluated with respect to resistance under the influence of thermo‐oxidative factors, evaporation and susceptibility to hydrolytic decomposition. The selected esters were complemented with commercial additives to make up a fully synthetic lubricating oil with a polialphaolefin base. A special attention was paid to the effect of ester compounds on the physicochemical properties of the formulated oil.FindingsThe obtained results show that straight adipates and sebacates of 2‐ethylhexanol and 3,5,5‐trimethylhexanol as well as oligomeric esters in which molecules are terminated with 2‐ethylhexyl group can be used as component of lubricating oils. The addition of these esters reduced the pour point by a few degrees in comparison with the tested base oil. The temperature fell below 40°C. The presence of esters significantly improved the viscosity index. A positive influence of esters on the lubricating properties of the formulated oil was also observed. On the contrary, dialkyl carbonates show too low boiling point, which is indicated by the high amount of volatile components, 19‐22 percent, in final product. Adipic and sebacic oligomers containing methoxyl groups in their structures proved to be immiscible with polyalphaolefins.Originality/valueThe achievement of this work is the synthesis of new oligomeric esters of dicarboxylic acids, which can be excellent additives for improving properties of synthetic oils. Further studies will be focused on the use of esters as components of engine oils. This requires real motor tests.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call