Diarylamino Groups as Photostable Auxofluors in 2-Benzoxazolylfluorene, 2,5-Diphenyloxazoles, 1,3,5-Hexatrienes, 1,4-Distyrylbenzenes, and 2,7-Distyrylfluorenes

Abstract

The relationship of structure to optical spectral properties was determined for five types of fluors in a search for an optimum-wavelength shifter to be used as part of the detection systems for high-energy particles from accelerators. In a search for photostable fluors to serve as waveshifters in plastic fibers it was found that the wavelengths of interest, absorption max 410 +/- 10 nm and fluorescence emission max 480 +/- 20 nm, along with other properties, such as high solubility and short fluorescence decay time, could be obtained from fluorophors composed of aromatic rings and vinyl groups only by using amino groups as auxochromes to give bathochromic shifts of wavelengths. Since primary, monoalkyl, and dialkylamino groups were not sufficiently photostable, a number of fluorophores bearing diarylamino groups were investigated. Syntheses of the fluors made use of the Buchwald amination, an improved version of the Emmons-Horner reaction, and other common reactions. The fluor types were the following: a 2-benzoxazolyl-7-(4-diarylamino)fluorene 7, 2-(4-cyanophenyl)-5-(4-aminophenyl)oxazoles 14 and 20, 1,3,5-hexatrienes 24a-d and 26a-c, 1,4-distyrylbenzenes 31d-g and 32a-e, and 2,7-distyrylfluorenes 40a,d-e. The unsymmetrical fluors 7, 14, and 20 were not as bright as the best hexatrienes, distyrylbenzenes, and distyrylfluorenes, which were all symmetrical. Where the 1,6-diaryl-1,3,5-hexatrienes 24a-d had high fluorescence quantum yield (Phi(f)), the 1,1,6,6-tetraryl-1,3,5-hexatrienes 26a-c had both lower epsilon and Phi(f). Where the 1,4-distyrylbenzenes 31d-g had high Phi(f), the 1,4-bis(2-phenylstyryl)benzenes 32a-e had Phi(f) = 0. Diarylamino groups as auxofluors conferred higher photochemical stability than dialkylamino groups on similar fluorophores. The 1,4-distyrylbenzenes 31d,e and the 2,7-distyrylfluorenes 40d,ehad the most desirable properties overall, which included fast decay times of 2 ns. Computer simulations predicted absorption and emission wavelengths fairly well, but were of little help for the prediction of brightness, stability, Phi(f), or decay time.