Diameter control of multiwalled carbon nanotubes using experimental strategies

Abstract

Multiwalled carbon nanotubes (MWNTs) were synthesized using a chemical vapor deposition floating feed method in a vertical reactor. Effects of the preparation variables on the average diameter of carbon nanotubes were systematically examined using the fractional factorial design (FFD), path of the steepest ascent, and central composite design (CCD) coupled with the response surface methodology. From the FFD study, the main and interactive effects of reaction temperature, methane flow rate, and chamber pressure were concluded to be the key factors influencing the diameter of MWNTs. Two empirical models, representing the dependence of the diameter of carbon nanotubes at the vicinities around maximum (420 nm) and minimum (15 nm) on the reaction temperature and methane flow rate, were constructed in two independent CCD studies. These models, shown as contour diagrams, indicated that the diameter of carbon nanotubes generally increased with increasing reaction temperature and methane flow rate. Based on both models, the diameter of MWNTs from 15 to 420 nm can be controlled precisely by using a continuous CVD fabrication method.