Diagonal-symmetrical and Midline-symmetrical Unit Cells with Same Porosity for Bone Implant: Mechanical Properties Evaluation

Abstract

In this study, mechanical properties of bionic porous structures with diagonal-symmetrical and midline-symmetrical unit cells were studied when the porosities were same. Three typical unit cells (Diamond (DO), Rhombic Dodecahedron (RD), and Octet Truss (OT)) were selected, in which DO has diagonal-symmetrical shape, while RD and OT share midline-symmetrical structure. Based on the same porosity, corresponding models were designed, and Ti6Al4V samples were manufactured by electron beam melting. Then, using Mechanical Properties Testing (MPT) and Finite Element Analysis (FEA) methodologies, mechanical properties and transmissions of different porous structures were evaluated. Besides, composition and details before and after printing were analyzed with Energy Dispersive Spectrometer (EDS), X-ray diffraction (XRD) and Scanning Electron Microscope (SEM). MPT results showed that midline-symmetrical shape would have superior compressive performance than diagonal-symmetrical shape, but opposite trend for the torsion performance, which were in line with FEA prediction. Furthermore, effective modulus of DO, RD and OT were 2.59 GPa, 4.89 GPa, and 1.77 GPa, approximating the mechanical properties of human bones. Additionally, manufacturing defects and discrepancies between FEA and MPT were found. This study would provide great helps for unit cell selection and initial mechanical properties matching for optimum bone implants.