DGS based miniaturized wideband MIMO antenna with efficient isolation for C band applications

Abstract

Abstract A wideband multiple-input multiple-output (MIMO) antenna for C-band applications is presented in this paper. It consists of 2 × ${\times}$ 1 hexagonal motifs which serves as radiating elements. The side of each hexagonal element is 5.73 mm and the overall dimension of the proposed MIMO antenna is 30 × ${\times}$ 20 × ${\times}$ 1.6 mm3. The hexagonal motifs are embedded on inexpensive FR-4 lossy substrate. Thereafter, a circle with radius 1 mm is etched at the center of each hexagonal motif. Inverted L-shaped stubs are employed to attain efficient isolation between the nearby antenna elements. Four inverted L-shaped stubs are included to further enhance the isolation and eliminate the antenna size increment simultaneously, by suppressing the surface waves. Before using the decoupling approach, the MIMO antenna had an impedance bandwidth of 6.7 GHz and an isolation of −20 dB. The suggested antenna’s impedance bandwidth and isolation are 5.83 GHz and −52 dB, respectively, after using a decoupling approach (inverted L-shaped stub). The proposed MIMO antenna had a peak gain and radiation efficiency of 3–7 dBi and better than 90% (with decoupling), 2.75 to 6 dBi and greater than 60% (without decoupling). To verify the proposed design, a prototype was developed to compare the simulated parameters with the measured one. The envelope correlation coefficient (ECC) was less than 0.05, and channel capacity loss (CCL) less than 0.3 was achieved with DGS. Besides, scattering matrix such as return loss S 11 and transmission coefficient S 21 between two elements, radiation pattern, and current distribution was also favorable. Thus, the proposed MIMO antenna is advantageous to be used for C-band applications such as developing new generation air-borne and space-borne radars, as well as X-band applications.