Abstract

Abstract Previous paper (Rahman et al. 2017) showed that the yield of softwood kraft pulp increased by the addition of either polysulfide or sodium borohydride because of higher hemicellulose retention. An increase in hemicellulose content can make dewatering more difficult as WRV of the pulp increases, but instead, an overall increase in pulp yield could improve dewatering as a sheet of a certain weight will contain fewer fibres, giving a more open sheet structure. It was therefore of interest to measure the dewatering properties of low grammage handsheets (20 g/m2) under conditions mimicking the tissue paper machine dewatering processes, and sheet strength properties, WRV, °SR and fibre dimensions were also studied. The results showed that the positive influence of overall yield increase dominated over the negative influence of an increase in hemicellulose content on the dewatering properties, particularly at lower refining energy levels. Moreover, higher yield and higher hemicellulose content pulps had a higher tensile index at the same dryness. A given tensile index was achieved with less refining energy. The results indicate that increased yield and hemicellulose content by modification of the kraft pulping process will result in a pulp with a potential to improve tissue paper quality.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.