Abstract
Ferric sulfate sludges demonstrated superior dewaterability over sludges formed by coagulation with aluminum.Tighter regulations governing stream discharge of coagulation sludge from the primary sedimentation process prompted the University of Iowa Water Treatment Plant to consider sludge‐handling options. This pilot study was undertaken in order to investigate differences in the mechanical dewatering of sludges formed by using either alum or ferric sulfate coagulants. The approach used various volumes of wasted lime sludge produced from the plant's softening process as a filtering aid. After the short pilot study, dewatering data from a bench‐scale plate‐and‐frame filter press indicated that ferric sludge was easier to dewater than sludges formed by coagulation with alum. The addition of lime‐softener sludge increased the dewaterability of all sludges tested, primarily by increasing the sludge feed solids concentration, which may have also decreased blinding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
