Development, verification and experimental validation of a 3D numerical model for tubular solar receivers equipped with Raschig Ring porous inserts

Abstract

This study presents a numerical investigation of gaseous tubular absorbers used in a solar furnace and introduces a 3D model to simulate porous inserts with random packing of metallic Raschig Rings (RR) at pore-scale. A comprehensive verification and validation process was conducted based on the experimental data obtained at Plataforma Solar de Almeria (SF60). The evaluations were carried out on three samples, including a smooth pipe (SP) and two enhanced pipes (20RR and 40RR) with 20 mm and 40 mm RR inserts. The effects of several influential parameters, such as the fluid turbulence model, the effective thermal conductivity of the porous material, and the randomness of the RR in the porous structure, were studied to assess the accuracy and repeatability of the model in predicting thermal and fluidic characteristics of air inside the absorber pipes under different working conditions. A detailed thermo-hydraulic analysis revealed an irregular flow pattern inside the porous zone, while the air recirculation at the porous entrance and exit provides an uneven pressure drop distribution in the azimuthal direction. Moreover, fluid turbulence is enhanced downstream of the porous insert thanks to several stream jets formed by uneven flow discharge at the insert outlet face, which improves heat transfer in that area. The analyses demonstrated a significant improvement in heat transfer, with a maximum enhancement factor of 10–15 than the smooth tube. Additionally, in the evaluation of thermo-hydraulic performance, the enhanced absorbers exhibit Performance Evaluation Criteria up to 2, compared to the tube without RR inserts.