Abstract
The combination of unstable hydrogen storage materials with a high pressure tank provides a potential solution to on-board hydrogen storage system for fuel cell vehicles. However, none of the available solid-state materials can fulfill all the requirements. In this work, ZrFeV-based alloys were systematically investigated for the possible use in such kind of hybrid storage devices.Among these alloys studied here, the composition (Zr0.7Ti0.3)1.04Fe1.8V0.2 shows the best overall properties with a reversible hydrogen capacity of 1.51 wt%, and a hydrogen desorption pressure of 11.2 atm at 0 °C. Besides, this alloy also shows excellent stability without obvious capacity loss even after 200 hydrogen absorption/desorption cycles. Calculated results show that the gravimetric density of the hybrid storage system combining a 35 MPa high pressure tank with (Zr0.7Ti0.3)1.04Fe1.8V0.2 alloy is 1.95 wt% when the volumetric density reaches 40 kg/m3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
