Development of undersized (12.5 mm diameter) low‐dilution glass beads for X‐ray fluorescence determination of 34 components in 200 mg of igneous rock for applications with geochemical and archeological silicic samples

Abstract

A low‐dilution, undersized (12.5 mm diameter) glass–bead technique was developed for X‐ray fluorescence determination of 34 components (Na2O, MgO, Al2O3, SiO2, P2O5, K2O, CaO, TiO2, MnO, Fe2O3, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Cs, Ba, La, Pr, Nd, Sm, Gd, Dy, Er, Yb, Hf, W, and Pb) in precious silicic samples for geochemistry and archeology. This preparation was consolidated based on the properties of the specimen, including disk formability and detachability from a small crucible, through variation of the amounts of the two samples (basaltic and granitic rocks) and releasing reagent. The specimen was prepared by fusing a mixture of 200 mg of powdered sample, 200 mg of lithium tetraborate as a flux, and 60 µl of 18.42 mass% lithium chloride solution as a releasing agent in a small platinum crucible. Calibration curves were drawn using synthetic calibration standards, which were prepared by compounding chemical reagents, such as oxides, carbonates, and diphosphates containing analytes. The calibration curves showed good linearity with correlation coefficient values greater than 0.990. Using the proposed method, we determined 34 components in five igneous rock reference samples. The results were in agreement with the recommended values, accounting for uncertainties. With this method, preparation requires only small amounts of the powdered sample and alkali flux; however, still allowing for determination of many analytes, which is advantageous when dealing with limited quantities of precious samples. The present method has potential applications in the chemical characterization of various geological and archeological samples. Copyright © 2015 John Wiley & Sons, Ltd.