Development of the technical specifications and changes to the TSs for refractories by JSC “The Ukrainian research institute of refractories named after A. S. Berezhnoy” in 2018

Abstract

This article includes information about development of technical specifications (TS) and changes to the TSs for refractories by institute in 2018.
 In 2018, the following standards were developed, agreed with enterprises in accordance with the requirements of the state standardization system and approved: one new technical specification and 14 change to TS for serial refractory products, produced by Ukrainian enterprises; 3 new TS for serial refractory products developed PrJSC “KDZ” were checked and agreed; 6 new technical specification and 11 change to the current specifications for the pilot batches of refractories manufactured by JSC “The URIR named after A. S. Berezhnoy”.
 Changes to technical specifications and new technical specifications have been developed in concordance with requirements of the modern system standardizations of the Ukraine (СОУ КЗПС 74.9­02568182­003:2016, ДСТУ 1.5:2015, СОУ МПП 01.120­090:2005), endorsed by manufacturers and enterprise consumers, tested for compliance with current legislation, technical regulations and regulatory documents and entered into the database «Technical conditions of Ukraine» — SE “Kharkivstandartmetrology”, and approved by the technical committee TC 7 “Refractories”.
 Institute plans to continue work on the development of TS and changes to the TSs for refractory products, study and analysis of the global level of standardization in the field of refractories.