Development of the Structure of Cemented Carbides during Their Processing by SLM and HIP

David Bricín,Antonín Kříž,Michal Ackermann,Zdeněk Jansa,Dana Kubátová,Zbyněk Špirit,Jiří Šafka

doi:10.3390/met10111477

David Bricín, Antonín Kříž + Show 5 more

Open Access

https://doi.org/10.3390/met10111477

Copy DOI

Abstract

The study focuses on microstructural evolution in a WC-Co powder mixture during Selective Laser Melting (SLM) and hot isostatic pressing (HIP) processing. This powder mixture contained a 13 ± 0.6% weight fraction of Co binder and WC particles of mean size of 3.0 ± 1.9 μm. SLM of the mixture produced samples of various densities, depending on the volumetric energy density (VED) applied. High VED levels led to densities of up to 88%. The aspects affected by changes in VED included the pore density as well as the resulting types of phases and the size of WC phase particles. At high VED, the material began to develop cracks due to embrittlement. This had multiple causes: coarsening of α-phase (WC), evaporation of β-phase (Co binder), and precipitation of η-phase. At low VED levels, pores formed, typically of nonsymmetric shapes, with sizes larger than 500 μm. Subsequent HIP processing led to an increased density, up to 96% of solid material. Contributions to this increased density were provided by structure transformations, namely, coarsening of α-phase by up to 1300% when compared to the powder grain size, and formation of η-phase. The results provided a basis for steering further research to explore to a greater depth the SLM and HIP processing of selected WC-Co powder mixtures with as yet unused ranges of process parameters.

Highlights

The structure of cemented carbides (CC) substantially depends on their manufacturing route.It may involve various techniques which include production of powder mixtures, their compaction, and sintering
Contributions to this increased density were provided by structure transformations, namely, coarsening of α-phase by up to 1300% when compared to the powder grain size, and formation of η-phase
The results provided a basis for steering further research to explore to a greater depth the Selective Laser Melting (SLM) and hot isostatic pressing (HIP) processing of selected WC-Co powder mixtures with as yet unused ranges of process parameters

Summary

Introduction

The structure of cemented carbides (CC) substantially depends on their manufacturing route.It may involve various techniques which include production of powder mixtures, their compaction, and sintering. The typical resulting microstructure of a cemented carbide consists of hard WC carbide particles (α-phase), tough metallic binder of Co (β-phase) and certain other carbides (γ-phase) with tetragonal crystal structure. Typical applications of CCs include cutting tools and parts subjected to wear, such as nozzles, throwing blades, and molds for large-series production [6,7]. All these parts share one feature: very simple shapes of their outside and interior surfaces. These surfaces can be adjusted for a specific application by subsequent processing, which may include grinding, tumbling

Methods

Results

Conclusion